PRODUCT DIRECTIONS:
Vacuum carpet thoroughly to remove dry particulate soil. Test all carpeting for color fastness before applying any carpet cleaning product. Mix product according to directions using dilution ratios listed below and on the product label.
Traffic Lane Pre-Spray: Depending upon the soil load, mix 2 - 4 oz per gallon of hot or cold water and apply at the rate of 200 to 400 Sq Ft per gallon of RTU solution (dampen all fibers). For a 5 quart injection spray with an 8 to 1 tip, use 22 to 44 oz and fill with water. 5 to 15 minutes dwell time will help, but may not be necessary. This product might be too foamy for some hot water extraction systems.
As a low moisture encapsulation cleaner: Dilute 2 to 4oz per gallon of hot or cold water and apply at the rate of 200 to 400 Sq Ft per gallon of RTU solution (dampen all fibers). 5 to 15 minutes dwell time will help, but may not be necessary.