PRODUCT DIRECTIONS:
Dilution: 1 to 5 parts water to 1 part product — test application recommended. See Other Product Uses below.
Coverage: Dependent upon substrate and other conditions.
SB2790 Con-D-Soil is most effective when applied by low- pressure spray. Brush application and agitation may prove helpful on some surfaces. Dwell times are from 5 to 30 minutes. Do not let the cleaner dry on surfaces; mist with water or diluted cleaner to keep the surfaces wet. Removal of the cleaner and contaminant can be accomplished most successfully with pressure washing equipment. If only garden hose rinsing is available, light scrubbing or brooming during rinsing may be required. A thorough rinsing is required. Dilutions are 0 to 5 parts water.SB2790 Con-D-Soil is for use by professional contractors only. Projects where complete rinsing cannot be accomplished will require an additional neutralization step. Do not use on bright aluminum, metalized glass, “self cleaning” glass or fine wood surfaces.
Engine Degreaser: 1-2 Parts Water to 1 Part Product
No Scrub Tire/Wheel: 1-3 Parts Water to 1 Part Product
Concrete or Brick: 1-5 Parts Water to 1 Part Product
Heavy Duty Degreaser: -10 Parts Water to 1 Part Product
All Purpose Cleaner: 1-40 Parts Water to 1 Part Product
Cars, Trucks, Trailers: -60 Parts Water to 1 Part Product
Pressure Washers: 1-100 Parts Water to 1 Part Product