Image 1 of 1
Image 1 of 1
Image 1 of 1
Image 1 of 1
All prices subject to GST and PST.
•••
SB 2795 Pro Surface Cleaner is a highly effective non-acidic cleaner for hard surfaces such as concrete, natural stone, tile and grout, brick pavers, Omni stone and more. SB 2795 can be successful in the removal of light to moderate soiling, grease and oil deposits, rubber heel marks; as well as leaf, mulch, organic stains and many other surface deposits.
PREPARATION:
Provide protection for foliage and pedestrian traffic. Test non-masonry surfaces for any possible adverse reactions. Protect all surfaces and situations where damage might occur during usage.
All projects should start with a test application to determine the suitability of the cleaner, acceptable application method and dilution ratio. Test areas of at least ten square feet are recommended and should involve the most severely contaminated condition.
APPLICATION:
Most effective when applied by low-pressure spray. Brush application and agitation may prove helpful on some surfaces. Dwell times vary from 5 to 30 minutes. Removal best accomplished by pressure washing. Thorought rinsing required. Dilution ratios are from 0 to 10 parts water depending on conditions.
•••
Please note that our products are not fulfilled through our website. You may pick up your order at our warehouse, or arrange shipping by phone or email. Using the ‘Add to Cart’ button below is purely to put a cart together to determine total pricing. Thank you.
All prices subject to GST and PST.
•••
SB 2795 Pro Surface Cleaner is a highly effective non-acidic cleaner for hard surfaces such as concrete, natural stone, tile and grout, brick pavers, Omni stone and more. SB 2795 can be successful in the removal of light to moderate soiling, grease and oil deposits, rubber heel marks; as well as leaf, mulch, organic stains and many other surface deposits.
PREPARATION:
Provide protection for foliage and pedestrian traffic. Test non-masonry surfaces for any possible adverse reactions. Protect all surfaces and situations where damage might occur during usage.
All projects should start with a test application to determine the suitability of the cleaner, acceptable application method and dilution ratio. Test areas of at least ten square feet are recommended and should involve the most severely contaminated condition.
APPLICATION:
Most effective when applied by low-pressure spray. Brush application and agitation may prove helpful on some surfaces. Dwell times vary from 5 to 30 minutes. Removal best accomplished by pressure washing. Thorought rinsing required. Dilution ratios are from 0 to 10 parts water depending on conditions.
•••
Please note that our products are not fulfilled through our website. You may pick up your order at our warehouse, or arrange shipping by phone or email. Using the ‘Add to Cart’ button below is purely to put a cart together to determine total pricing. Thank you.
