PRODUCT DIRECTIONS:
To use Procyon Plus Powder, for portable pre-spray,
Mix 2 oz. of powder per 5 gallons of hot water, applying from bottom to top to prevent streaking. For Hydro-Force, follow in-tank directions. For truck mounts, add 8 oz. per 5 gallons for heavy traffic or 2 oz. per gallon for standard cleaning. The solution can be used as a pre-spray or with various cleaning systems, and it should be left on for approximately 10 minutes before extraction.
For Portable Sprayer (Pre-Spray):
Mix: Combine 2 oz. of Procyon Plus Powder with 5 gallons of hot water.
Apply: Spray the solution from the bottom to the top of the carpet.
Dwell Time: Allow the solution to sit for about 10 minutes.
Extraction: Follow with your portable extraction system to remove the soil and solution.
For Truck Mounts:
Concentrated Solution: For heavy-duty cleaning, add 8 oz. per 5 gallons of concentrated cleaning solution.
Standard Cleaning: For lighter cleaning, use 2 oz. per gallon of solution.
Use in-line: The powder is a heavy-duty, triple-strength carpet detergent designed for truck mount hot water extraction systems.
General Use and Tips:
Heavy Soil:Mix 24 oz. of powder per 5 quarts of hot water for heavy soil conditions.
Standard Soil:Mix 16 oz. of powder per 5 quarts of hot water for standard cleaning.
Stain Removal:Procyon Plus Powder is effective at removing tough stains like grease, oil, blood, inks, road tar, and food spills.
Application Method:The powder is designed for use in hot water extraction systems, including truck mounts, portable extractors, and rotary scrubbers.
Rinse:After extraction, ensure all the solution is rinsed out to avoid leaving behind any residue.